©
Siem
ens AG
2003, C
:\Siem
ens
\P
ro
dukte\CX70\output\SUG
\CX70_SUG
_en
_040819_
rs_pk_d
ruck\S_ULY
R_
Setup
.f
m
47
Setup
VAR Langua
ge: en; V
A
R issue
date: 040728
right page (47)
of CX70 Retail en, A31008-H7103-A1-1-7619 (19.08.2004, 13:04)
HTTP profile
The phone default setting varies
from service provider to service pro-
vider. Consult your service provider
or go to this address in the Internet
for more information
Authentication
Activate or deactivate encrypted
WAP dial-up (CSD connections only).
Fax/data
Send voice/fax
b
Set this function on the phone
before
transmission so that you can switch
from voice mode to fax mode.
Rec. voice/fax
Start the required communication
program on your PC and select the
function on the phone
during
the call
(the PC will take over the connec-
tion).
Rec fax/data
b
The call is signalled by a special ring-
tone and the type of call (fax or data)
is displayed. Now start the commu-
nication program in your PC to
receive the fax/data.
Security
C
¢
T
¢
Security
¢
Select function.
Auto key lock
If activated, the keypad is locked
automatically if no key has been
pressed for one minute in standby
mode. This prevents the phone from
being used accidentally. However,
you can still be called and you can
still make an emergency call.
Direct call
Only
one
phone number can be
dialled. The required phone code
(4 to 8 digits) is set by you and
entered at the first security setting.
#
To switch off,
press and
hold
, then enter the tele-
phone code.
Only
‚
b
Restrict calls to SIM-protected num-
bers in the Phonebook.
Additional information
Block/unblock in standby mode. In each
case:
#
Press and hold