Product overview
2.4 Communications processor CP 1625Dev
CP 1625 / CP 1625Dev
18
Operating Instructions, 04/2018, A5E43075902-AA
2.4.2
Properties
The CP 1625 is a PCIe module for the connection of PCs to Industrial Ethernet.
Note
The PROFINET ports must not be connected directly to the Internet.
The essential properties are as follows:
●
Optimized for PROFINET IRT
●
With Ethernet-Real-Time-ASIC SOC-1
●
Two RJ45 sockets for connecting end devices or other network components
●
Front LEDs on the RJ45 sockets for efficient self-diagnostics of connection and data
exchange (Link and Activity LED)
●
Integrated 2-port real-time switch
●
Automatic hardware detection is supported
●
24 V DC power supply for operation outside of the PC housing
●
Two UART interfaces are available over the header
●
Pushbutton for manually restarting the board
●
Two LEDs on the board that signal an error or maintenance (Error and Maintenance LED)
●
NAND flash
●
SYNC Out signal available via the solder joint
●
DDR2 memory technology up to 256 MB RAM
External power supply
The CP 1625Dev has the "X80" interface for infeed of an external 24 V DC power supply.
Note
Only for stand-alone operation outside an IPC.
Ethernet
The CP 1625Dev is intended for operation in Ethernet networks.
It also has the following features:
●
Connections are designed for 100BASE-TX
●
Data transmission speed of 100 Mbps in full/half duplex is supported
●
Autonegotiation (can also be turned off)
●
Autocrossing
