Siemens COM32 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 20

Siemens COM32 Скачать руководство пользователя страница 4

iv

COM32 INSTALLATION & OPERATION MANUAL

Siemens maintains control of all specifications for the SEAbus and SEAbus Plus protocols. A modification to a
protocol for any type of device must be approved by Siemens Energy & Automation, Inc. to guarantee compatibility.
Any changes made must be backward compatible so that existing products can coexist on the communications bus
without having to support the newer features of the protocol

Siemens continuously strives to ensure backward compatibility, reliability, and easy implementation of both protocols
to meet current market communications requirements. Siemens therefore reserves the right to make improvements
including changes to specifications at any time without notice or obligation.

ACCESS, ISGS, Isolated Multi-Drop, Power Monitor, Power Monitor PC, SAMMS, SAMMS-LV, SAMMS-MV, SCOR,
SEAbus, SEAbus Plus, SIEServe, Static Trip III,WinPM, and Wisdom are trademarks, Sensitrip and Sentron are regis-
tered trademarks of Siemens Energy & Automation, Inc.

Quattro Pro is a registered trademark of Borland International, Inc.

CROSSTALK is a registered trademark of Digital Communications Associates, Inc.

«
...
2
3
4
5
6
...
»

Содержание COM32





















Отзывы:

Нет отзывов