Safety
5
Siemens Building Technologies
Fire Safety & Security Products
09.2008
1 Safety
1.1 Target
group
The instructions in this document are designed only for the following target group.
Target readers
Qualification
Activity
Condition of the
product
Installer
Technical training for
building or electrical
installations.
Installs the product,
individual components
of the product or
replacement parts.
Components of the
product are not yet
installed or need to be
replaced or modified.
1.2 General
safety
precautions
z
Read the general safety precautions before operating the device.
z
Follow all warnings and instructions marked on the device.
z
Keep this document for reference.
z
Always pass this document on together with the product.
z
Please also take into account any additional country-specific, local safety
standards or regulations concerning project planning, operation and disposal of
the product.
z
It is recommended that all preparatory work (e.g. fitting of accessories) be
carried out in a workshop prior to final installation.
Liability claim
z
Do not connect the device if it is damaged or any parts are missing.
z
Do not make any changes or modifications to the device unless they are
expressly mentioned in this manual and have been approved by the
manufacturer.
z
Use only spare parts and accessories that have been approved by the
manufacturer.
Risk of failure due to incorrect installation
z
The fuse for the device and the fuse for the electrical system of the building must
be installed separately.
Risk of cable damage due to stress
z
Use only cable types that are approved for the environmental requirements.
z
The cable glands used must be appropriate for the cable diameter.
