Siemens CFG3.F200, Руководство пользователя, Страница: 6 / 10

6
Interfaces
Ethernet interfaces
Plug 3 x RJ45, shielded
Interface type 10Base-T / 100Base-TX, IEEE 802.3 compatible
Bit rate 10/100 Mbps, autosensing
Protocol BACnet on UDP/IP, Modbus TCP/IP, KNX IP, Haystack
over RESTful API, OPC UA, oBix, Sedona, and SQL.
Cabling, cable type 10 Mbps: Min. CAT3, shielded cable is recommended
100 Mbps: Min. CAT5, shielded cable is recommended
Cable length Max. 100 m (330 ft)
Screw terminals, plug-in
Cu-wire or Cu-strand with wire end sleeve 1 x 0.6 mm
∅
to 2.5 mm
2
(22 to 14 AWG)
or 2 x 0.6 mm
∅
to 1.0 mm
2
(22 to 18 AWG)
Cu-strand without wire end sleeve 1 x 0.6 mm
∅
to 2.5 mm
2
(22 to 14 AWG)
or 2 x 0.6 mm
∅
to 1.5 mm
2
(22 to 16 AWG)
Stripping length 6...7.5 mm (0.24...0.29 in)
Screwdriver Slot screws, screwdriver size 1 with shaft ø = 3 mm
Max. tightening torque 0.6 Nm (0.44 lb ft)
USB interface (4G internet connection)
Plug Type A
Interface type USB 2.0
Bit rate 480 Mbit
Max. load 500 mA
Max. cable length 5 m
Conformity
Ambient conditions and protection classification
Classification as per EN 60730
Automatic action
Control function
Degree of pollution
Overvoltage category
Type 1
Class A
2
III
Design Suitable for use in protection class I or II systems