e1510a
5
Fire & Security Products
Siemens Building Technologies Group
03.2002
3
Paper replenishing
B1Q101
B2Q191
Paper path
1.
Switch off the printer via control unit.
2.
Swing out the printer unit:
remove the screws on the right-hand side or open hinged cover with the key,
swing out the unit to the left.
3.
Remove the used paper tape.
4.
Lift the paper flap
A
and slide a new paper roll over the spindle
B
.
5.
Press the leading edge of the paper lightly against the flap and feed it into the
printer through the slot
C
.
Push down the release lever
D
to insert the paper.
6.
The paper can be transported by means of the knurled wheel
E
.
7.
Thread the leading edge of the paper around the take-up roller
F
and fix it with the
paper gripper
G
.
8.
Press winding up key
H
, the paper take-up motor is switched on for approx. 20
secs.
9.
Switch on the printer.
C
B
A
E
D
H
F
G
4.
5.
5. 6. 8.
7.
–
379977
Spare paper rolls, 4 pcs.
or „JUJU TP 50KS–A” or „HONSHU PS 65 B1” or „MITSUBISHI F–200 U7X”.
Procedure
Spare paper rolls
