Basic settings
en
13
Programme Food
Cookware
Weight range
in kg
Information
P06
Potatoes
With lid
0.15–1.00
¡
For boiled potatoes, cut fresh potatoes into small,
equally sized pieces.
¡
Add one tablespoon of water and a little salt for every
100 g boiled potatoes.
P07
Vegetables
With lid
0.15–1.00
¡
Weigh fresh, washed vegetables scales.
¡
Cut the vegetables into small, uniform pieces.
¡
Add one tablespoon of water for every 100 g boiled
potatoes.
Cooking food with the automatic programmes
1.
Weigh the food.
You require the weight in order to set the pro-
gramme.
2.
Place the food on microwave-safe cookware and
cover with a lid.
3.
Add the volume of water in accordance with the
manufacturer's instructions on the packaging.
4.
5.
Once the programme has finished, stir the food
again.
6.
The food should be left to stand for an additional 5
to 10 minutes until it reaches a uniform temperature.
The cooking results are dependent on the food
quality and consistency of the food.
10.6 Combi-cooking programme
With the combi cooking programme, you combine microwave and grill.
Programme
Food
Cookware
Weight range in kg
P08
Frozen bake, up to 3 cm deep
Open
0.40–0.90
Cooking food using the combi cooking
programme
1.
Take the food out of its packaging.
2.
Weigh the food.
You require the weight in order to set the pro-
gramme.
3.
Place the food in microwave-safe, heat-resistant
cookware that is not too big.
4.
5.
Once the programme has finished, leave the food to
rest for another 5–10 minutes to allow the temperat-
ure to even out.
11 Basic settings
You can configure the appliance to meet your needs.
11.1 Overview of the basic settings
Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features
of your appliance.
Setting
Selection Meaning
Button tone
1
Switch on the button tone.
Button tone
Switch off the button tone.
Note:
The button tone remains active for
and
.
Demo mode
Activate or deactivate demo mode.
Note:
The appliance is switched off. You can use the buttons and the display,
the buttons do not work. Demo mode is mainly useful for dealers.
1
Factory setting (may vary according to model)
11.2 Changing basic settings
Requirement:
The appliance is switched off.
1.
Press and hold
and
for a few seconds.
a
The display shows the first basic setting.
2.
Press
.
a
The current value flashes on the display.
3.
Use the settings area to set the required value.
4.
Press
.
a
The appliance implements the setting.
5.
Press
.
