Siemens ATI510, Руководство по установке

Страница: 13 / 16

Installation
13
Building Technologies 020_ATI5100_A6V10235012_a_en
Fire Safety & Security Products 23.09.2009
8.2 Connecting cables
It is recommended to use a cable type IYSTY (Twisted Pair) 2 x 2 x Ø 0.6 mm or
larger diameter.
1.
Insert the cable through the cable entry hole [

10] in the base.
2. If necessary, carefully remove the breakout pieces [

10] .
3. Connect the individual wires to the screw terminals.
Connections
Contact pin Abbreviation Function
1
A/+ RS485
2 B/- RS485
3 + + Vin
4 - - Vin
5 to 10 Not connected

Attach the cable with a cable tie.
Cable tie
8.3 Mounting the base
Make sure to mount the unit only on surfaces that are sufficiently hard and rigid.
1.
Mark 3 holes for the mounting screws [

10] and one for the tamper contact
[

10] .
2. Drill the holes and screw the base.