8 Default settings
Reading MIFARE Classic
UID
Reading MIFARE Plus SL1 – SL3
UID
Reading MIFARE DESFire EV1
UID
Communications mode
OSDP (to change to Wiegand mode remove Jumper 1
and Jumper 3)
Backlight
Always on (change with 3CT tool)
Bus address
1 (Up to eight are supported)
Wiegand output
26/32/37/56 Bit
Wiegand key PIN burst
4/8 Bits
Light frame
Follows Red, Green LED inputs in Wiegand mode
Tamper/Yellow Connection
Tamper output (change to yellow LED with 3CT tool)
Wiegand heart beat mode
OFF
Time-out for configuration card (keypad backlight
turns off when this timeout expires subsequent to
last keypress)
3 seconds
Activation time-out
30 seconds
Hold-off time for card read
100 milliseconds
Reception for card (time before the same card will
be detected in the field again)
Inactive
Min background illumination
12
Max background illumination
255
Off-line indication
Yes
Buzzer volume for key press
2
Buzzer volume for card read
2
System sound
10
8.1 3CT Tool
To
change
the
default
configuration
of
the
reader,
use
the
3CT
tool.
You
can
purchase
the
3CT
tool
as
a
separate
download.
You
can
use
the
3CT
tool
to
configure
MIFARE
Classic
and
DESFire
EV1
card
formats
to
be
configured
along
with
Wiegand
options
to
be
used
for
the
card
readers.
For
further
information,
please
contact
your local distributor.
The
3CT
tool
configures
the
format
in
which
user
cards
are
interpreted
by
the
card
reader.
The
3CT
tool
supports
configuration
of
the
following
options: Tamper
Output
/
Yellow
Input
and
Heart
beat
Mode.
©
Siemens
2019
25
A-100417-b
15.04.2019
