Siemens AlgoPilot B3Q661, Руководство по эксплуатации

Страница: 11 / 140

General information
i
11
Building Technologies A6V10225450_b_en_--
Fire Safety 2017.09.07
Example
Example of an indication of danger:
DANGER! External voltage
Disconnect the component from the power supply.
Safety-relevant working instructions
Country-specific
standards
The products are developed and produced in compliance with the relevant international and Eu-
ropean safety standards. Should additional country-specific, local safety standards or regulations
concerning planning, assembly, installation, operation and disposal of the product apply in the
place of operation, then these standards or regulations must also be taken into account in addi-
tion to the safety regulations mentioned in the product documentation.
Electrical instal-
lations
Work on electrical installations may only be carried out by a qualified electrician or by an instruct-
ed person working under the guidance and supervision of a qualified electrician, in accordance
with the electrotechnical regulations.
·
Control panels must be disconnected from the power supply during commissioning or mainte-
nance work whenever possible.
·
Connection terminals with an external voltage supply must be provided with a sign reading
'DANGER – External voltage'.
·
Mains leads to the control panel must be installed separately and provided with a clearly
marked fuse.
·
Earthing must be carried out in compliance with local safety regulations.
·
When work is carried out in explosion-hazardous areas, the appropriate safety precautions
must be taken.
Assembly, in-
stallation, com-
missioning and
inspection work
·
If any tools or accessories such as ladders are required, safe and suitable devices must be
used.
·
Spurious activation of the remote transmission must be reliably prevented.
·
Always inform the fire brigade before testing the remote transmission.
·
The activation of fire controls for test purposes must not cause damage to the system or parts
thereof.
·
Fire controls must only be activated after the test has been completed and the system has
been definitely handed over to the customer.
·
Third party systems or devices must only be activated in the presence of the responsible per-
son.
·
When work on management stations and system terminals is performed, the safety regulations
of the connected sub-systems must be observed. This especially applies when switching off
system components.
·
In the case of extinguishing systems, always use the "General installation instructions" as a
guideline. These guidelines are available on request.