Company Confidential
s
Com
Copyright 2005© Siemens AG
Page
49
of
53
TD_Repair_L2.5_A70_A75_R1.0.pdf Release
1.0
10.5 IO Connector (X211) with ESD protection (Z211)
IO Connector
Pin
Name IN/OUT Notes
1
POWER
I/O
POWER is needed for charging batteries and for supplying
the accessories. If accessories are supplied by mobile, talk-
time and standby-time from telephone are reduced.
Therefore it has to be respected on an as low as possible
power consumption in the accessories.
2 GND
3 TX
O
Serial
interface
4
RX
I
Serial interface
5
DATA/CTS I/O
Data-line for accessory-bus
Use as CTS in data operation.
6
RTS
I/O
Use as RTS in data-operation.
7
CLK/DCD
I/O
Clock-line for accessory-bus.
Use as DTC in data-operation.
8
AUDIO_L
Analog O
driving ext. left speaker
With mono-headset Audio_L and Audio_R differential mode
9 GND
10 AUDIO_R
Analog O
driving ext. right speaker With mono-headset Audio_L and
Audio_R differential Signal
11 GND_MIC Analog I
for ext. microphone
12 MICP2
Analog I
External microphone
