Siemens 9810 Series, Руководство пользователя, Страница: 90 / 218

Webpages
On a hardware-locked meter, you cannot add, delete or modify any webpage files.
If you are connected to your device over Ethernet, changing Ethernet
configuration parameters without another method of configuration enabled may
cause loss of communications with your device and render it inaccessible.
NOTICE
LOSS OF ACCESS
Failure to follow these instructions can result in loss of access to the
device.
Ensure you maintain sufficient access to communicate to and configure your
device.
1. Open a web browser and enter your meter’s IP address in the address box.
The webpage login prompt is displayed.
If the browser cannot connect to the webserver, check the web protocol
setting.
2. Enter a valid username and password.
NOTE: The username and password are defined by your meter’s security
configuration; if standard security is enabled, the password is the same as
the display password with a default username of 9810. The default
display password is 0 (zero). To help increase the security of your meter’s
configuration and data, configure your meter’s username and passwords
to be different from the default values.
3. Select your desired Language from the dropdown list, and click Log In .
Your meter’s webpages are displayed. The default page is the Monitoring
webpage, showing real-time data.
4. Select the main menu tab that corresponds to the category of information you
want to view, and select the webpage menu from the list on the left.
The webpage content is displayed.
5. Click the webpage content headings to expand and view the meter’s data.
6. Select Setup to view and edit your meter’s configuration.
Related Topics
• Factory default settings
Viewing files using your meter’s webpages
You can load files of a variety of standard formats, such as *.pdf, *.jpg and *.png
into the webpage folders on your meter’s internal FTP site where they can be
viewed using your meter’s webpages.
Videos in *.mp4 format can be played in most browsers. The filenames must be
compatible with your meter’s FTP filename requirements.
NOTE: Image files are shown at full-size (100%). Scale images to the desired
size before loading them onto your meter’s internal FTP site.
1. Access your meter’s internal FTP site.
2. Open the web folder. Copy your file into the subfolder that corresponds to the
webpage main menu tab you want to access your file from.
3. Connect to your meter’s webpages. Select the main menu item that
corresponds to the folder where you stored your file in step 2. Your file is
listed in the webpage menu.
90 7EN05-0390-00