Siemens 8DJH Скачать руководство пользователя

Страница: 143 / 174

Operation | 9

143/174

500-8384.9 • Version 11 • Installation and Operating Instructions • 8DJH

9.5.1 Switching the three-position switch-disconnector from OPEN to CLOSED

position

NOTICE

No-load switching operations with the three-position switch-disconnector

Opening the three-position switch-disconnector directly after charging the spring energy
store can damage the switchgear.
⇨ After charging the spring energy store, close the three-position switch-disconnector

first, and then open it.

INFORMATION

To insert the operating lever, a spring resistance must be overcome in the actuating opening.

☒ Three-position switch-disconnector in OPEN position
1. Check service readiness [

▶

Page 135, "Ready-for-service

indicator"].

2. Remove the padlock (optional) from the locking device.

3. Push the locking device upwards, and hold it.

✓ The actuating opening for "spring charging" is open.

4. Insert the operating lever and turn straight clockwise as far as it

will go.

✓ The "spring charged" indicator shows "spring charged".

5. Remove the operating lever.

✓ The locking device returns to its initial position.
✓ The feeder is ready to close.

6. Actuate the ON pushbutton.

✓ The position indicator of the switch-disconnector shows the

CLOSED position.

✓ The "spring charged" indicator still shows "spring charged".

7. Fit the padlock (optional) on the locking device at the desired

position [

▶

Page 137, "Mechanical interlocking with padlock"].

✓

The feeder is connected to the busbar.

Содержание 8DJH















































































































































































Результаты поиска

Содержание 8DJH

Отзывы:

Похожие инструкции для 8DJH

Бренды по названию

Популярные бренды

Siemens 8DJH, Инструкция по установке и эксплуатации

Результаты поиска

Содержание 8DJH

Отзывы:

Похожие инструкции для 8DJH

Бренды по названию

Популярные бренды