Diagnostic data
Note
SITRANS CC240 supplies diagnostic data to the web server, OPC UA Server, etc. Adaptations to
the plant or devices must be checked and implemented using the existing engineering system.
3.2
Notes on use
NOTICE
Possible functional restrictions in case of non-validated plant operation
The device is tested and certified on the basis of the technical standards. In rare cases,
functional restrictions can occur during plant operation.
Validate the correct functioning of the plant to avoid functional restrictions.
Note
Use in an industrial environment without additional protective measures
This device was designed for use in a normal industrial environment according to IEC 60721-3-3.
3.3
Prerequisites for safe use
This device left the factory in good working condition. In order to maintain this status and to
ensure safe operation of the device, observe these instructions and all the specifications relevant
to safety.
Observe the information and symbols on the device. Do not remove any information or symbols
from the device. Always keep the information and symbols in a completely legible state.
3.3.1
Laws and directives
Observe the safety rules, provisions and laws applicable in your country during connection,
assembly and operation. These include, for example:
• National Electrical Code (NEC - NFPA 70) (USA)
• Canadian Electrical Code (CEC) (Canada)
Further provisions for hazardous area applications are for example:
• IEC 60079-14 (international)
• EN 60079-14 (EU)
Safety notes
3.3 Prerequisites for safe use
SITRANS CC240 and SITRANS MX300
26
Operating Instructions, 06/2021, A5E47280695-AB
