SIMATIC RTLS PCB OEM PULSE
2
Manual, 10/2018, C79000-G8976-C552-01
Legal notices
Concept of the warning notices
This manual contains notices which you need to observe to ensure your own personal safety, as well as to avoid
damage to equipment. Notices relating to your personal safety are highlighted by a warning triangle; notices
relating to property damage only do not have a warning triangle. Warnings in descending order according to the
degree of danger are shown as follows.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury can result if proper precautions are not taken.
CAUTION
indicates that minor personal injury can result if proper precautions are not taken.
NOTICE
indicates that damage to property can result if proper precautions are not taken.
If more than one degree of danger is present, the notice representing the highest degree of danger will be used. A
notice warning of injury to persons with a warning triangle may also include a warning relating to property
damage.
Qualified personnel
The product/system to which this documentation applies may only be handled by qualified personnel for the
intended purpose taking into account the documentation relating to the intended purpose and, in particular, the
safety and warning notices it contains. Due to training and experience, qualified personnel is capable of
recognizing risks and avoiding possible dangers when handling these products/systems.
Proper use of Agilion products
Note the following:
WARNING
Agilion products may only be used for the applications indicated in the catalog and in the relevant technical
documentation. If third-party products and components are used, these must be recommended or approved by
Agilion. These products can only function correctly and safely if they are transported, stored, set up, mounted,
installed, commissioned, operated and maintained properly. The permitted environmental and ambient
conditions must be adhered to. Notices in the relevant documentation must be observed.
Trademarks
All names identified by ® are registered trademarks of Siemens AG. The remaining designations in this
publication may be trademarks whose use by third parties for their own purposes could violate the rights of the
owner.
Disclaimer of liability
We have checked this document for agreement with the hardware and software described. Since deviations
cannot be precluded entirely, we cannot guarantee full agreement. However, the data in this manual is reviewed
regularly and any necessary corrections included in subsequent editions.
