background image

Documentation on configuration
You will find detailed information on configuring the devices in the following configuration 
manuals:

• SCALANCE W780/W740 nach IEEE 802.11n Web Based Management

• SCALANCE W780/W740 nach IEEE 802.11n Command Line Interface

Note

Make sure that you read the explanations and instructions in the readme.htm file.

Training, Service & Support    

You will find information on Training, Service & Support in the multi--language document 
"DC_support_99.pdf" on the data medium supplied with the documentation.

Security information

Siemens provides products and solutions with industrial security functions that support the 
secure operation of plants, systems, machines and networks.

In order to protect plants, systems, machines and networks against cyber threats, it is necessary 
to implement – and continuously maintain – a holistic, state-of-the-art industrial security 
concept. Siemens’ products and solutions constitute one element of such a concept.

Customers are responsible for preventing unauthorized access to their plants, systems, 
machines and networks. Such systems, machines and components should only be connected to 
an enterprise network or the internet if and to the extent such a connection is necessary and only 
when appropriate security measures (e.g. firewalls and/or network segmentation) are in place.

For additional information on industrial security measures that may be implemented, please 
visit 
https://www.siemens.com/industrialsecurity (

https://www.siemens.com/industrialsecurity

). 

Siemens’ products and solutions undergo continuous development to make them more secure. 
Siemens strongly recommends that product updates are applied as soon as they are available 
and that the latest product versions are used. Use of product versions that are no longer 
supported, and failure to apply the latest updates may increase customer’s exposure to cyber 
threats.

To stay informed about product updates, subscribe to the Siemens Industrial Security RSS Feed 
under 
https://www.siemens.com/industrialsecurity (

https://www.siemens.com/industrialsecurity

). 

Firmware

The firmware is signed and encrypted. This ensures that only firmware created by Siemens can 
be downloaded to the device.

The firmware is available on the Internet pages of the Siemens Industry Online Support: (

https://

support.industry.siemens.com/cs/de/en/view/109802059

)

Introduction

SCALANCE W786-x

6

Operating Instructions, 12/2021, A5E03678337-14

Содержание 6GK5786-1FC00-0AA0























































































Отзывы: