manualshive.com logo in svg

Siemens 6ES7148-6JG00-0BB0, Руководство пользователя

Поделиться
Скачать
Siemens 6ES7148-6JG00-0BB0 Скачать руководство пользователя страница 24

 

Parameters/address space 

 

4.2 Explanation of the parameters 

Communication module CM 8x IO-Link + DI 4x24VDC M12-L (6ES7148-6JG00-0BB0 
Equipment Manual, 09/2020, A5E49284833-AA 

23

 

4.2

 

Explanation of the parameters 

Diagnostics: Missing 2L+ 

Enable of the diagnostics for no or insufficient load voltage. 

Diagnostics: Undervoltage 1L+ 

Enabling of the diagnostics for insufficient supply voltage 1L+. 

Diagnostics port 

This parameter enables the diagnostics for the selected IO-Link port. 

In the diagnostics A distinction is made between error and maintenance interrupts. The 

possible diagnostics are dependent on the IO-Link device used. Additional information about 

the diagnostic interrupts can be found in the description of the utilized IO-Link device. 

Hardware interrupt (device notification) 

Enable of the hardware interrupt for the selected IO-Link port.  

The possible hardware interrupts are dependent on the IO-Link device used. Additional 

information on the hardware interrupts can be found in the description of the IO-Link device 

used. 

 

 

Note 
Configuration as digital input or digital output 

Note that you cannot enable any port parameters or diagnostics alarms in SIO mode. 

 

Port configuration without S7-PCT 

This parameter releases the port configuration without S7-PCT for the module. 

 

 

Note 
Changes to the port configuration 

If you have assigned the IO-Link device parameters via port configuration without S7-PCT, or 

have configured the port as a digital input, digital output or deactivated, you can no longer 

change the port configuration via S7-PCT. 

 

Port Qualifier Information 

This parameter enables the PortQualifier Information (PQI). 

The PQI provides information on the device status of the port and IO-Link. 

Содержание 6ES7148-6JG00-0BB0










































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды