Properties
1.1 Digital electronic module 8DO DC24V/0.5 A (6ES7132-4BF00-0AA0)
Digital electronic module 8DO DC24V/0.5 A (6ES7132-4BF00-0AA0)
Manual, 04/2007, A5E01077385-01
11
Voltages, currents, potentials
Rated load voltage L+ (from the power module) 24 VDC
•
Reverse polarity protection
Yes
1
Total current of the outputs (per module)
4 A
Electrical isolation
•
Between the channels
No
•
Between the channels and backplane bus
Yes
Permissible potential difference
•
Between the different circuits
75 VDC / 60 VAC
Insulation tested
500 VDC
Current consumption
•
From the rated load voltage L+ (no load)
Max. 5 mA per channel
Power dissipation of the module
Typically 1.5 W
Status, interrupts, diagnostics
Status display
Green LED per channel
Diagnostics function
No
Data for selecting an actuator
Output voltage
•
At signal "1"
Min. L+ (-1 V)
Output current
•
At signal "1"
– Rated value
– Permitted range
0.5 A
7 mA up to 0.6 A
•
With signal "0" (leakage current)
max. 0.3 mA
Output delay (for resistive load)
•
At "0" to "1"
max. 300 μs
•
At "1" to "0"
max. 600 μs
Load resistor range
48 Ω to 3.4 kΩ
Lamp load
max. 5 W
Connecting two outputs in parallel
•
For redundant triggering of a load
Yes (per module)
•
To increase performance
No
Control of a digital input
Yes
Switch rate
•
For resistive load
100 Hz
•
On inductive load
2 Hz
•
For lamp load
10 Hz
Limitation (internal) of the voltage induced on
circuit interruption
Typically L+ (-55 V to -60 V)
Reverse-voltage proof
Yes, if using the same load voltage as at the
power module
Short-circuit protection of the output
Yes
2
•
Threshold on
Typically 1.5 A
1
Polarity reversal can lead to the digital outputs being connected through.
2
Per channel
