background image

SIEMENS 5890 DSL Router
User’s Guide

Chapter 4  User Setup

User Management

SIEMENS

30

Adding/Modifying A User Account

User accounts are used to control access to the router and the Internet. To add a user account:

1. Click 

New User

 on the User Management page. This displays the Add/Modify User page. 

(To modify a user, select the desired name in the 

Select User

 list and click 

Edit User 

to display the Add/

Modify User page. Note that changing the password or privileges of an existing user account may 
terminate a user’s current activity or connection.)

2. Enter 

User Name

Password

, and 

Confirm Password

 in the appropriate boxes. (The User Name cannot 

be modified for an existing account. When editing an existing account, the Password and Confirm 
Password values are not displayed. If you leave them blank, the password is not changed.)

3. Do one of the following to assign privileges to this user account:

Select one of the buttons at the top of this page to automatically assign pre-set privileges to the user 
based on common user roles. (Refer to 

Management Classes

 for details on the privileges automatically 

assigned to each role.)

Manually select the management activity you want to assign to this user account. For each management 
activity class, click to select 

Read

Read-Write

 privileges for the user, or select 

None

 for no privilege. 

4. In 

Allow Access From

, specify one or more of the following:

LAN

: Can access from the LAN side.

WAN

: Can access from the WAN side.

Console

: Can access from a console.

User access verification is performed if the user account is verified during user authentication. User access 
verifies that the user account can access the router through the connectivity method being used, such as 
over the LAN or through a console.

5. Click 

Enabled

 for 

Account Access

 to enable this account. By default, accounts are disabled when added. 

6. Click 

Apply

 to add/modify the user account.

 

Содержание 5890







































































































Отзывы: