Document No. 563-002
Installation Instructions
January 12, 2007
24 V-AC
C
E
H
C H
DO 1 DO 2 DO 3 DO 4 DO 5
NO C NO C NO C NO C NO C
DO 6 DI 3
DI 2
FLN
TRUNK
NO C AI 3
TX RX
+
-
S
BST
RTS
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
WLAN0004R2
TEC Power
(From Transformer)
TEC
(Typical)
Channel
Network I.D.
24 Vac 1.2 VA
24 Vac
Power Line
Alternate
Power
3M Scotchlok
TM
Power Connectors (Typical of 2)
1. Thread TEC power
wire through
connector.
2. Fold up flap to
lock TEC wire
into connector.
3. Insert power wire
from FLNX into
connector so it
appears in window.
4. Use lineman’s
pliers to pinch
connecting bar in
place and connect
wires internally.
5. Close connector
cover to secure
wires.
TEC
Power Wire
FLNX
Power Wire
Figure 4.
FLNX Communication and Power Wiring.
6. Connect the antenna.
Be sure the antenna is
securely connected to the FLX.
For a remote mount antenna, do the following:
a. Locate the liquid tight
fi
tting so that the
antenna extension cable does not incur
excessive pull force. At the desired enclosure
location, punch a 1/2” knockout and use the
locknut to secure the body of the liquid tight
fi
tting into the knockout.
b. Route the antenna through the body of the
liquid tight
fi
tting (Figure 5). Hand-tighten the
liquid tight
fi
tting nut to secure the antenna in
place.
Make certain the liquid tight
fi
tting nut
tightens on the antenna base, not the
antenna itself, so the antenna can be
articulated.
c. Connect the antenna wire securely to the
FLNX.
Siemens Building Technologies, Inc.
Page 3 of 4
