Siemens 3RN2011 Скачать руководство пользователя страница 10

Страница: 10 / 70

Introduction

1.3 DataMatrix code

SIRIUS 3RN2 thermistor motor protection relay

Manual, 10/2016, A5E34244868002A/RS-AA/001

1.3

DataMatrix code

A DataMatrix code is lasered onto the lower terminal cover of all devices of this series.
DataMatrix codes are standardized in ISO/IEC 16022. The DataMatrix codes on Siemens

devices use ECC200 coding.
The following device information is encoded in the DataMatrix codes as a bit stream:

●

Article number

●

Serial number

This information is stored in the following format in the DataMatrix code:

Article number

Serial number

Data identifier

Net content

Separator

Data identifier

Net content

Note
The information content is displayed without spaces.

This machine-readable information simplifies and accelerates handling of the respective

devices.

As well as fast access to the serial numbers of the respective devices for unique

identification, the DataMatrix codes simplify communication with Siemens Technical Support.

SIEMENS Industry Support App

DataMatrix codes primarily enable extremely fast and convenient access to all device-

specific information relating to an article number in the SIEMENS Service&Support Portal

(

http://support.automation.siemens.com

), such as operating instructions, manuals, data

sheets, FAQs, etc.

We provide the SIEMENS Industry Support app free of charge for this purpose and it can be

used on most commercially available smart phones and tablets.

The SIEMENS Industry Support app is available for iOS and Android-based devices and can

be accessed via the following links:

Link for Android

Link for iOS

Link for Windows Phone

Содержание 3RN2011







































































Результаты поиска

Содержание 3RN2011

Отзывы:

Siemens 3RN2011, Руководство пользователя, Страница: 10 / 70

Результаты поиска

Содержание 3RN2011

Отзывы: