Siemens 300Series Скачать руководство пользователя страница 69

Страница: 69 / 170

Making Calls

3-11

3.
Makin

Calls

To go back and forth (toggle) between the
picked up party and the original call, press
the Connect key.

Note:

You can also transfer, place on hold, place on consultation
hold, or park a call you have picked up. (See “Transfer” on
page 2-18, “Hold” on page 2-15, “Consultation” on page 3-12,
and “Park” on page 5-10.)

To screen an
incoming call pri-
or to picking it up
and adding it to a
conference

➩

Press the Hold key to place the conference
on hold.

➩

Press the line key for the incoming call.

Find out who is on the line.

➩

If you do not want to add the call to the
conference, hang up that line.

➩

If you want to add the call to the
conference, press the Hold key to place that
line on hold.

➩

Press the line key for the conference.

➩

Follow the steps given in “To pick up a call
and add it to a conference” on page 3-10.

Note:

You must be connected with the conference before you can
pick up a call and add it to the conference.

Содержание 300Series











































































































































































Результаты поиска

Содержание 300Series

Отзывы:

Похожие инструкции для 300Series

Бренды по названию

Популярные бренды

Siemens 300Series, Руководство пользователя

Результаты поиска

Содержание 300Series

Отзывы:

Похожие инструкции для 300Series

Бренды по названию

Популярные бренды