Package Contents
Your package includes the following:
Before you begin:
Step
1
Hardware Installation
1.
Ensure that the SpeedStream 2614 is powered OFF before commencing with installation. Leave
your DSL/Cable modem connected to its wall socket (phone line or cable outlet).
2.
Use Cat 5 Ethernet cable(s) to connect one or both of the following:
• PC(s) to one of the LAN ports on the SpeedStream router
OR
• A hub/switch to one of the LAN ports on the router
3.
Connect your DSL/Cable modem to the WAN port on the SpeedStream 2614 using the Ethernet
cable supplied with your DSL/Cable modem. If no cable was supplied with your modem, use a
straight-through Ethernet cable.
Note: An ISDN TA or dial-up modem may be connected to the SpeedStream 2614 Router as an alternate method of Internet access.
Please refer to the User’s Guide on CD for directions on using/configuring this type of connection.
4.
Connect the power adapter to the SpeedStream 2614. Use only the power adapter provided.
5.
(optional)
If you intend to use the SpeedStream router's print server functionality, connect the
parallel cable of the printer to the printer port on the router before powering on the router.
6.
Power ON the SpeedStream 2614
Safety and Certifications
SpeedStream
®
Quick-Start Guide
JUST GO TO
www.speedstream.com/reg/extwrnty
G E T A O N E Y E A R H A R D WA R E WA R R A N T Y E X T E N S I O N
O N Y O U R S P E E D S T R E A M P R O D U C T.
G E T A O N E Y E A R H A R D WA R E WA R R A N T Y E X T E N S I O N
O N Y O U R S P E E D S T R E A M P R O D U C T.
E X T E N D E D WA R R A N T Y !
E X T E N D E D WA R R A N T Y !
Keep
this
near
your
PC
to
know wher
e
to
go
for suppor
t, DSL
education
and
new
pr
oduct
info
.
w w w . s p e e d s t r e a m . c o m
L i v e a B r o a d b a n d L i f e
™
007-010
This offer may be revoked, amended, supplemented, revised, altered, changed or terminated at any time without notice in the sole and absol
discretion of Efficient Networks, Inc. This offer is available on select products only. This offer is available in select countries only. The offer
good for thirty (30) days from the date of installation. Offer void where prohibited by law. Certain restrictions may apply.
© 2001 Efficient Networks, Inc. A Siemens Company
FREE
FREE
SpeedStr
eam
®
Power
Reset
Link/ACT
10/100
WAN
LAN
1
2
3
4
SpeedStream
®
Software CD-ROM
SpeedStre
am
®
Power
Reset
Link/ACT
10/100
WAN
LAN
1
2
3
4
Speed
Stream
®
Pow
er
Rese
t
Link/ACT
10/100
WAN
LAN
1
2
3
4
2
Front View
SpeedStream 2614 4-Port DSL/Cable Router
AC Power Adapter
Safety and
Quick-Start Guide Documentation/
Extended Warranty
Certifications
Printer Port Driver CD and Registration Card
Information
This guide covers only the most common situations. Please refer to the full User’s Guide on the CD-ROM
if your network uses any of the following: existing router, existing DHCP server, or PC(s) using fixed (static)
IP addresses
Requirements:
Broadband Modem
PC(s) with the TCP/IP protocol installed
Cat 5 Ethernet cables with RJ-45 connectors
If your Internet Service Provider assigns your IP address dynamically, your PC should already be configured
properly for the SpeedStream 2614 to act as a plug-and-play device and does not require additional
configuration.
1.
Perform
TCP/IP
Setup for each PC as described in the
PC Setup
section on the back of this
guide. Remember to restart each PC when finished.
2.
Start your web browser. In the Address box, enter the following:
HTTP://192.168.254.254
3.
Press
Enter
. You will be prompted for a Password—The default Password is
admin
.
4.
When the password is entered correctly, you will see the
SpeedStream Router Status
screen.
5.
Select
Simple Setup
from the left-side menu and follow the prompts to change the password, set
the Time Zone and choose the appropriate Internet connection type. For detailed procedures
covering the most common broadband Internet access scenarios, refer to the procedures
provided on the back side of this guide.
If additional configuration is desired, select the
Advanced Setup
link from the left-side menu to configure
items such as: firewall parameters, DMZ host, virtual servers and special applications support for multi-
player online games. The most common scenarios are described on the back of this guide.
Printer Port Driver Installation:
1.
Ensure that the printer is connected to the parallel port on the router and both the printer and
router are powered on.
2.
Insert the supplied CD-ROM into your CD-ROM drive. If the setup program does not start
automatically, run SETUP from the root folder on the CD-ROM.
3.
Consult the User Guide on CD-ROM for step-by-step installation and configuration instructions
specific to your operating system.
4.
Repeat the procedure for each PC that will share the printer.
P R INTER
WA N
C O M
P O WER
DSL/Cable
modem
3
5
4
Printer
Back View
Step
2
Internet Connection Configuration
Step
3
Print Server Set-up
(optional)
