Manufactured by
Sivantos GmbH
Henri-Dunant-Strasse 100
91058 Erlangen
Germany
under Trademark License of Siemens AG.
www.bestsound-technology.de
www.bestsound-technology.com
Bezugsnummer:
Reference number:
D00095838
Ersetzt Ausgabe:
Replaces edition:
2014-03-21
Ausgabe/Edition:
2014-10-31
Life 5mi
SERVICE
Life 5mi
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
Changing the Wireless System Address
Seite/Page:
16/16
Service Instructions on how to change the e2e 2.0 wireless system address
The information send by the hearing instrument is address coded. The standard address for all remote controls and
hearing instruments systems is "0 ". In case there are different users in a close neighbourhood cross communica-
tion can occur. To avoid this the complete system needs to be set to a new address. If you wear two hearing inst-
ruments and use a remote control all devices have to be send for service.
Before changing the address the wireless functionality of the system should be validated by a wireless test.
Necessary measuring equipment:
PC, Noahlink, Connexx/HICOSS (Service software V 7.0 or higher), SIFIT (Service Software V 7.0 or higher)
1. Change the wireless address of a hearing instrument:
a) Activate Connexx and connect the hearing instrument
b) Detect instrument
c) Read out instrument
d) Choose folder " Fitting"
e) Press the button "Configuration" --
>
"Hearing Instrument"
f) Choose another Wireless Address
2. Change the wireless address of the Remote Control (TEK/miniTEK):
The wireless address of a remote control adapts automatically if it is connected.
3.
Change the wireless address of the Remote Control (ProPocket):
The service is not able to change the address.
A ProPocket with an alternative wireless address (Order number: 10 417 823) needs to be ordered from the
manufacturer.
NOTE:
Please save the new data settings in your client’s documentation for further service cases.
