17" color monitor
Technical data
Dimensions
CRT: 17" (43 cm)
Dot pitch:
0,26 mm
Dimensions:
(W x H x D): 408 x 415 x 450 mm
Weight: 22,1
kg
Accessories:
power cable (1,8 m), data cable (1,8 m)
Electrical data
Video:
ANALOG, positive, 0,7 V , 75 Ohm SYNC
pp
Horizontal Sync.:
TTL, Analog 0,3 V ,
pp
(H + V, Sync on green)
30 kHz - 80 kHz (multi-scanning)
Vertikale Sync.:
TTL, Analog 0,3 V ,
pp
(H + V, Sync on green)
50 kHz - 90 kHz (multi-scanning)
Power supply:
100 V - 127 V, 50 - 60 Hz
200 V - 240 V, 50 - 60Hz
Power consumption:
130 watts
Environmental data
Environment class 3K2, DIN IEC 721
Rated range of operation:
15 ˚C .... 32 ˚C
relative humidity:
10 % .... 75 %
Limit range of operation:
5 ˚C .... 40 ˚C
relative humidity:
5 % .... 85 %
Condensation must be avoided
A26361-K316-Z1-2-6419
English - 3
17" color monitor
Connecting the color monitor
!
Please note the information provided in the chapter "Safety" at the
beginning of this manual.
Do not cover the ventilation openings of the monitor.
2
3
4
1
1 = BNC/D-SUB Switch
3 = D-SUB connector
2 = Power connector
4 = BNC jacks
The data cable has a 15-point connector for the VGA controller and 5 BNC
connectors for connection to the monitor. The BNC connectors and BNC jacks are
marked with letters or colors.
Ensure that switch BNC/D-SUB (1) points to the left (BNC).
i
Connect the BNC connectors to the relevant jacks on the color monitor.
Plug the data cable at the PC into the VGA controller.
The connection for the monitor interface cable is a 15-pin connector with three
rows.
Then plug the power cable into the rear of the monitor.
Plug the power cable into the rear of the of the PC.
4 - English
A26361-K316-Z1-2-6419
