Advanced
- Advanced system configuration
Settings in BIOS Setup
A26361-D969-Z120-8-7619
29
PCI Device, Slot #n: Default Latency Timer
specifies the lowest number of clock cycles in which a PCI master board can be
active at the PCI bus;
n
stands for the number of the PCI slot. For the change to
take effect, you must switch your device off and then on again after the
BIOS Setup
has terminated.
Yes
The value predefined by the PCI board is accepted. The entry in
the corresponding field for PCI Device, Slot #n:
Latency Timer
is
ignored
No
The value predefined by the PCI board is ignored. The value set in
the relevant field of
PCI Device, Slot #n: Latency Timer
determines
the number of clock cycles.
PCI Device, Slot #n: Latency Timer
Requirement: The relevant field of
PCI Device, Slot #n: Default Latency Timer
must be
set to
No
.
The field defines the lowest number of clock cycles in which a burst can be
transferred on the PCI bus.
n
stands for the number of the PCI slot.
0000h
to
0280h
Number of clock cycles (default entry =
0040h
).
Advanced System Configuration
calls the submenu in which you can make additional settings.
Phoenix BIOS Setup
Advanced
Advanced System Configuration
Item Specific Help
ISA Memory Gap:
[Disabled]
Parity Mode:
[Disabled]
System Performance:
[Fast]
Feature Connector:
[Disabled]
F1
Help
↑↓
Select Item
-/+
Change Values
F9 Setup Defaults
ESC Exit
← →
Select Menu
Enter
Execute Command
F7 Previous Values
Example for submenu
Advanced System Configuration
