Important notes
10
A26361-D969-Z120-8-7619
The shipped version of this board complies with the requirements
of the EEC directive 89/336/EEC "Electromagnetic compatibility".
Compliance was tested in a typical PC configuration.
When installing the board, refer to the specific installation
information in the Operating Manual or Technical Manual of the
receiving device.
Connecting cables for peripherals must be adequately insulated to avoid
interference.
!
Components can become very hot during operation. Make sure you do
not touch components when making extensions to the system board.
There is a danger of burns!
i
The warranty expires if the device is damaged during the installation or
replacement of system expansions. Information on which system
expansions you can use is available from your sales office or the
customer service.
Boards with electrostatic sensitive devices (ESD) may be identified by labels.
When you handle boards fitted with ESDs, you must observe the following points
under all circumstances:
•
You must always discharge yourself (e.g. by touching a grounded object)
before working.
•
The equipment and tools you use must be free of static charges.
•
Pull out the power plug before inserting or pulling out boards containing ESDs.
•
Always hold boards with ESDs by their edges.
•
Never touch pins or conductors on boards fitted with ESDs.
