Settings
You can make settings in the setup menu or using the switch block on the system
board.
Setup menu
The setup menu displays settings and technical information on the PC's
configuration. The Operating Manual describes how to call the setup menu and
change menu entries. Pressing the function key
F1
provides help information on
each entry field.
The setup menu consists of the following screen pages:
System Configuration
System Security Options
Additional System Options
A26361-D824-Z120-5-7619
7
Settings
System Configuration page
CMOS Setup
System Configuration
---------------------------------------------------------------------------
Time (hh:mm:ss) 08:38:27 Date (mm/dd/yyyy) 01/06/1994
Diskette A: 1.4M
Diskette B: NONE
Cyl Hd Pre LZ Sec Mbyte
Hard Disk 1: 48 683 16 0 0 38 202
Hard Disk 2: NONE
Base Memory: 640K Video Display: EGA/VGA
Extended Memory: 3072K Speed Select: HIGH
ERROR HALT: HALT ON ALL ERRORS
---------------------------------------------------------------------------
<F1> Help <F8> System info <F10> Store CMOS <Esc> Exit Page
<...> Edit field <
↑↓←→
> Next field <PgUp> Next page <Ctrl> ... 01
Example of the
System Configuration
page
Time
Date
The
Time
field and the
Date
field show the time and date respectively
according to the PC. The time is shown in the format
hh:mm:ss
(hours:minutes:seconds) and the date is shown in the format
mm/dd/yy
(month/day/year).
!
If the settings in the
Time
and
Date
fields are frequently wrong when
you power up the computer, the lithium battery is dead. Change the
battery as described in "Add-on modules - Replacing the lithium
battery").
Diskette A
Diskette B
These two fields are used to specify the type of floppy disk drive installed.
The possible settings are:
360K
,
1.2M
,
720K
,
1.4M
,
2.8M
or NONE
.
Default entry for
Diskette A
:
3 1/2-inch floppy drive
1.4M
Default entry for
Diskette B
:
NONE
8
A26361-D824-Z120-5-7619
