Siemens Mobile TC45 Скачать руководство пользователя страница 66

Страница: 66 / 461

TC45 AT Command Set

3.1 AT+CMER

obile

TC45_ATC_V02.02

Page 66 of 461

4/16/04

Confidential / Released

Unsolicited Result Code

+CIEV:

A value of an indicator has changed.

Command Description

The read command returns the URC presentation mode

<mode>

and among others, the indicator event reporting

status

<ind>

The write command enables and disables the presentation of "

+CIEV

" URCs.

refers to the name of a "

+CIEV

" indicator and

is the new value of this indicator. All

registered indicator events will be issued to the TE.

Parameter Description

(&F)

Discard "

+CIEV

" URCs.

Discard "

+CIEV

" URCs when TA-TE link is reserved, e.g. in online data mode.

Otherwise they are forwarded directly to the TE.

Buffer "

+CIEV

" URCs in the TA while TA-TE link is reserved, e.g. in online data

mode, and flush them to the TE afterwards. Otherwise they are forwarded
directly to the TE.

Forward "

+CIEV

" URCs directly to the TE. If TC45 is in online data mode,

URCs are signaled via sending BREAK (100ms) and stored in a buffer. Once
it is back in command mode e.g. after

+++

was entered, all URCs stored in the

buffer will be output.

(&F)

Keypad event reporting is not supported by TC45.

(&F)

Display event reporting is not supported by TC45.

(&F)

Disable indicator event reporting.

Enable indicator event reporting.

(&F)

TA buffer of URCs defined within this command is cleared when

<mode>

1..3

is entered.

Name of indicator; for a list of all supported indicators please refer to

AT+CIND

and

AT^SIND

Value of indicator; for a list of all values for the supported indicators please refer to

AT+CIND

and

AT^SIND

<mode>

(num)

<keyp>

(num)

<disp>

(num)

<ind>

(num)

<bfr>

(num)

(str)

(num)

Содержание TC45














































































































































































































































































































































































































































































Результаты поиска

Содержание TC45

Отзывы:

Бренды по названию

Популярные бренды

Siemens Mobile TC45, Руководство пользователя

Результаты поиска

Содержание TC45

Отзывы:

Бренды по названию

Популярные бренды