5
112202RE120_-_M
Locating
- When the distance drops below 10 feet, switch to the ‘10’ (locate) scale for precise location of the
transmitter.
When you are directly above the transmitter the LED display shows how far away the transmitter is. The ‘10-1’ scale
will show distance to within 1 foot of the transmitter. This reading can be affected slightly by the presence of metal,
by local interference and by the nature of the soil, so the distances indicated should be taken as a guide.
After use
- Always turn OFF the receiver and transmitter (see below). Keep the inside of the transmitting module
clean and dry to ensure the transmitter rotates smoothly.
Turning on/off transmitter
– This procedure should be carried out with the receiver powered to enable you to
monitor the output (the pips). The transmitter is turned on and off using the magnet (key-ring) provided: Line up the
magnetized key-ring with the side of the transmitter, hold in place for approximately one second the remove. You
should then hear the transmitters turn on or off, depending upon it’s starting state (the pips will stop when the unit
has successfully powered down, or start when it has powered up). If the unit fails to power up/down repeat this step
while slightly changing the angle of the magnet relative to the transmitter and hold it in place against it for slightly
longer.
Caution
- The equipment does not function in metallic pipes. Accurate location may be difficult where electrical
cables or metallic services may deflect the transmitting signal.
SPECIFICATIONS
RECEIVER
Size:
165mm Long x 72mm Width x 42mm Diameter
Weight:
186g (complete with battery)
Battery life: 30 hours (approximate)
TRANSMITTER
Size:
75.5mm Long x 38mm Diameter
Weight:
112g (complete with batteries)
Battery life: 300 hours (approximate)
Attachment: 3/8 BSP
JETTING NOZZLE
Connection: G 5/8”
CUSTOMER SERVICE
If you have questions about the Sieger Tecta Drain Tracing System that are not answered in this user manual, please
do not hesitate to contact Sieger.
For other information you can always consult our website:
www.sieger-machinery.com
GROUND LEVEL
