Siegenia KFV GENIUS 2.1 PANIC, Руководство по сборке

Страница: 6 / 46

Introduction Assembly instructions GENIUS 2.1 PANIC
6 03.2017
KFV
1.8 Maintenance and service notes
• Monthly testing and maintenance must be carried out in
accordance with DIN EN 179 (Appendix maintenance
instructions) or DIN EN 1125 (Appendix maintenance
instructions). You will find more information on this in
chapter "Maintenance" of the Operating instructions
"Electro-mechanical systems"
• Never use cleaning agents that are aggressive or
contain solvents, as these may damage the surface of the
components.
• Both the contractor and the user must be trained in the
operation and maintenance of the multi-point lock.
1.9 Dimensions
All measurements are given in mm.
1.10 Visual indicators
1.10.1 Instructions and symbols
This symbol designates hazards that could
damage the product or something in the
surrounding area.
This symbol indicates special features and
designates facts that require increased
attention.
1.11 Explanation of symbols
Milling cutter or drill diameter
Groove length
Groove depth from component
Groove depth from profile
Through hole
for metal profiles
for timber profiles
for PVC profiles
1.12 Other types of indicators
Below is a list of symbols used in these assembly instructions
and their meanings:
• Items of text following this marker are found in lists.
► Items of text with this marking in front of them are
instructions that must be followed in the specified order.
" " Items of text in quotation marks are cross-references to other
chapters or sections.
1.13 Screw recommendation