Siegenia KFV BS 6000, Руководство по сборке

Страница: 29 / 64

H39.MFVRS009EN-00 02.2019 29 / 64
Assembly instructions Multi-point locks, key operated
BS 6000 OF/OR, BS 6000, BS 6600
4.4 Installing the hardware components
Prior to the assembly of the hardware, observe the enclosed assembly instructions of the
manufacturer.
Compare the drilling template for the hardware with the positions of the fixing holes for the
gear box before drilling (see chapter 3.4 „Main lock types, key-operated“ from page 14 ).
Dismount the multi-point lock before drilling.
Marking and drilling the holes
f
With the multi-point lock installed, adjust the drilling template on the profile cylinder and mark the positions of
the holes.
f
Dismount the multi-point lock and drill the holes.
f
Install the multi-point lock again.
1
2
f
Insert the cylinder lock [1 ] into
the main lock and fix the cylin-
der lock with the cylinder lock
screw [2].
f
Install the hardware set accor-
ding to the assembly instruc-
tions of the producer.