7.6
X62 – COM1 Interface
The COM1 connector X62 is plugged on the COM1 connector of the drive, see
8 “Connection to the Drive”, page 16
.
Via the COM1 interface the serial RS232 connections 1 and 2 and the CAN bus are es-
tablished. The supply voltage for the terminal is also supplied via this connection.
9-pole female D-sub connector
X62
Pin
I/O
Name
Meaning
1
I
VCC5
5 V voltage supply
2
O
SD-TX1
Transmit data
3
I
SD-RX1
Receive data
4
I/O
CAN_L
CAN_L
5
I/O
GND
Ground
6
I
SD-RX2
Receive data
7
O
SD-TX2
Transmit data
8
I/O
CAN_H
CAN_H
9
I/O
GND
Ground
Stud bolt flange: max. tightening torque = 0.7 Nm
7.7
X63 – JTAG Download Socket
The JTAG download socket is an 8-pole row of holes and is used by the SIEB & MEYER
service staff to load a new operating terminal software. If you want to load a new soft-
ware into the operating terminal, please contact the SIEB & MEYER service.
15
Drive System SD2x - Operating Terminal 0362150 and 0362153
Connector Pin Assignment
