Siding Tools Industries PKT6-2, Инструкция по эксплуатации

Страница: 4 / 16

4
CUTTING
Cutting Preparation
Secure the blade to lock the
mechanism. Lift the handle and
position the blade in the locked
position.
Warning
: Do not put your
fingers against the sharp edge
of the blade at any time.
Cutting Preparation
The mechanism is locked when
the pivot is raised upwards as
shown in the picture. To do this,
raise the handle to its highest
and
manipulate the pivot
manually.
Warning
: Do not put your
fingers against the sharp edge
of the blade at any time.
Cutting Preparation
Slide profile by sideway into
the predefined block for the
type of profile to be cut. Put the
blade in the cutting position by
raising the handle very high to
unlock the mechanism, then
down the handle to cut.
Warning
: Do not put your
fingers against the sharp edge
of the blade at any time.