Side-Power SR Series, Руководство пользователя

Страница: 4 / 16

4
5920 2 2020
-
SR user manual
Thruster Operation
EN
Take time to practice operation in open water to become familiar with the thruster and to avoid damages to your boat or people.
How to use a Bow Thruster
1. Turn on the main power switch for the bow thruster. (NB: Always turn off the main power switch when not onboard.)
2. Turn on the control panel by pushing both “ON” buttons on the original Side-Power panel simultaneously. (NB: If another type of control is
installed, push the On/Off switch for the bow thruster.)
*Turn off the control panel by pushing both “OFF” button
4. To Turn the bow in the desired direction push the red button for port movement or the green button for starboard.
- For joystick control, move the joystick in the direction you wish the bow to move.
-Other controls like footswitches or toggle-switches on the throttle can be used. Engage the port control, the bow will turn to port etc.
5. Depending on the sideways speed of the bow, you must disengage the control device shortly before the bow is in the desired position. (NB: The
boat will continue to move after disengaging the thruster control.)
How to use a single stern thruster
Due to space limitations, a vessel may only have a stern thruster. In this case, the stern thruster is used in the same way as a single bow thruster
for moving the boat’s stern. Follow the above instruction for operation use.
How to use a combined bow and stern thruster
The combination of a bow and stern thruster off ers total manoeuvrability to the boat and the ability to move the bow and the stern separately from each
other. This enables you to move the boat sideways in both directions and turn the boat around its axis 360º staying stationary.
NB: At any signifi cant cruising speed (+1-2 kn) the side thruster will have little eff ect to steer the vessel.
STATUS/ALARM LEDS:
Solid YELLOW LED light = the panel is on.
Flashing GREEN LED light = thruster is deploying.
Solid GREEN LED light = thruster is deployed and ready to operate.
Flashing RED LED light fl ashes = thruster retract phase,
All LEDs out when panel/thruster is shut down.
(NB: If something unexpected happens while deploying/retracting thruster, the LEDs will fl ash alarm codes according to fault codes in this
manual.)
MC_0059
!
Please refer to the graphic for special considerations relating to your model
!
8700
ON/ OFF CONROL PANEL
MG_0099
Retractable Control Panel
Activating the bow thruster
Press both “ON” button to
activate thruster.
YELLOW status LED.
GREEN status LED.
RED status LED.
Directional buttons.
Press “OFF” button to deactivate
thruster.
*Control panel example *Control panel example
*Control panel example *Control panel example
*Additional stern control panel example *Additional stern control panel example
Activating the stern thruster
Activating both bow and
stern thruster to rotate the
boat on axis
Activating both bow and
stern thruster to push the
boat sideways