WARNING
Do not use damaged, frayed or deteriorated air
Air powered tools can vibrate in use. Vibration,
repetitive motions or uncomfortable positions may
be harmful to your hands and arms. Stop using any
tool if discomfort, tingling feeling or pain occurs.
Seek medical advice before resuming use.
Do not carry the tool by the hose.
Keep body stance balanced and firm. Do not over-
reach when operating this tool.
IMPORTANT SAFETY INFORMATION ENCLOSED.
READ THIS MANUAL BEFORE OPERATING THE MACHINE.
FAILURE TO OBSERVE THE FOLLOWING WARNINGS COULD RESULT IN INJURY.
Always wear hearing protection when operating
this tool.
supply hose before installing, removing or adjusting
any accessory on this tool, or before performing any
maintenance on this tool.
Always wear eye protection when operating or perfor-
ming maintenance on this tool.
Operate at 90 psig (6.2 bar / 620 kPa) Maximum air
pressure.
EMERGENCY
GATE VALVE
PLACING TOOL IN SERVICE
LUBRICATION
Always use of an air line lubricator with these tool.
Every eight hours’ operation, if a lubricator is not used on
the compressed air network, inject 1/2 to 1cm
3
approved air
tool oil through the machine’s inlet connection.
SAFE OPERATION
•
Always wear eye protection when operating or performing maintenance on this tool.
•
Always wear hearing protection when operating this tool.
•
Keep hands, loose clothing and long hair away from rotating end of tool.
•
Anticipate and be alert for sudden changes in motion during start up and operation of any power tool.
•
•
Air powered tools can vibrate in use. Vibration, repetitive motions or uncomfortable positions may be harmful to
your hands and arms. Stop using any tool if discomfort, tingling feeling or pain occurs. Seek medical advice before
resuming use.
•
Use impact rated accessories recommended by
Sidchrome
•
•
•
accessory on this tool, or before performing any maintenance on this tool.
