3
WARNING
Do not use damaged, frayed or deteriorated air
hoses and fittings.
Air powered tools can vibrate in use. Vibration,
repetitive motions or uncomfortable positions
may be harmful to your hands and arms. Stop
using any tool if discomfort, tingling feeling
or pain occurs. Seek medical advice before
resuming use.
Do not carry the tool by the hose.
Keep body stance balanced and firm. Do not
overreach when operating this tool.
IMPORTANT SAFETY INFORMATION ENCLOSED.
READ THIS MANUAL BEFORE OPERATING THE MACHINE.
FAILURE TO OBSERVE THE FOLLOWING WARNINGS COULD RESULT IN INJURY.
Always wear hearing protection when operating
this tool.
Always turn off the air supply and disconnect
the air supply hose before installing, removing
or adjusting any accessory on this tool, or before
performing any maintenance on this tool.
Always wear eye protection when operating or
performing maintenance on this tool.
Operate at 90 psig (6.2 bar / 620 kPa) Maximum
air pressure.
GENERAL SAFETY INSTRUCTIONS
WARNING
•
Always wear ANSI Z87.1 eye protection when operating or performing maintenance on this tool. Everyday
eye glasses are not safety glasses
•
Always wear hearing protection when operating this tool
•
Keep hands, loose clothing and long hair away from rotating end of tool
•
Anticipate and be alert for sudden changes in motion during start up and operation of any power tool
•
Keep body stance balanced and firm. Do not overreach when operating this tool
•
Do not operate this tool for long periods of time. Vibration caused by tool action may be harmful to your
hands and arms. Stop using any tool if discomfort, tingling feeling or pain occurs. Seek medical advice
before resuming use
•
Use impact rated accessories recommended by
Sidchrome only. Inspect accessories before use. Do not
use cracked or damaged accessories
•
Do not operate this tool in the presence of flammable liquids, gasses, dust, or explosive atmospheres
•
This tool is not insulated against electric shock
•
Always turn off the air supply and disconnect the air supply hose before installing, removing or adjusting
any accessory on this tool, or before performing any maintenance on this tool
•
For safety, top performance, and maximum durability of parts, operate this tool at 90 psig
(6.2 bar / 620 kPa) maximum air pressure at the inlet with 1/2’’ (13mm) inside diameter air supply hose
•
Do not use damaged, frayed or deteriorated air hoses and fittings
•
Do not lubricate tools with flammable or volatile liquids such as kerosene, diesel or jet fuel
•
Do not remove any labels. Replace any damaged label
