Sicma Eco-Chipper 100, Инструкция по эксплуатации

Страница: 15 / 20

Sicma S.p.A.
Miglianico (CH)
page 15
MAINTENANCE
Maintenance is a fundamental operation to extend life and performances of any agricultural
implement; taking care of the machine grants you not only a good work condition, but also a longer
life of the whole equipment and a greater safety in the workplace.
The operating times indicated on this manual have just an informative character and are referred to
normal conditions of use; they can thus undergo variations according to the type of service, to the
more or less dusty environment, to seasonal factors, etc.
MAINTENANCE SCHEDULE
EVERY 10 HOURS OF WORK
-
At the end of every working day it is advisable that you clean accurately the machine so that
its parts are always in good working condition.
-
Grease crosses on the PTO shaft.
-
Make a general inspection to verify possible hydraulic oil leaks or the presence of damaged
parts.
-
Make sure the knives are in good conditions, sharpened and perfectly fixed by the tightening
bolts.
EVERY 25 HOURS OF WORK
-
Grease the driveshaft crosses through the special lubricating nipples.
-
Grease the transmission shaft through the proper lubricating nipples.
EVERY 50 HOURS OF WORK
-
Check that belts are strongly tightened.
-
Check that all bolts and nuts are correctly tightened.
MAINTENANCE INTERVENTIONS
Before executing maintenance activities on the machine, stop
engine, disengage power takeoff, pull parking brake and
place the equipment on the ground in horizontal position.