2
Safety information
2.1
Intended use
The TMS/TMM inclination sensors are measuring devices consisting of an electronic
sensor and integrated evaluation electronics. The tasks for which the measuring device
is designed include recording inclinations in solar thermal energy, photovoltaics or
heavy-duty vehicle applications.
SICK AG assumes no liability for losses or damage arising from the use of the product,
either directly or indirectly. This applies in particular to use of the product that does not
conform to its intended purpose and is not described in this documentation.
2.2
Incorrect use
The inclination sensors do not constitute safety components according to the EC Machi‐
nery Directive (2006/42/EC). The inclination sensors must not be used in explosion-
hazardous areas. Any other use that is not described as intended use is prohibited. Any
use of accessories not specifically approved by SICK AG is at your own risk.
WARNING
Danger due to improper use!
Any incorrect use can result in dangerous situations.
Therefore, take note of the following information:
■
Use only in accordance with the intended use.
■
All information in these operating instructions must be strictly complied with.
2.3
Requirements for the qualification of personnel
The personnel who work on and with the device must be suitably authorized, trained,
and sufficiently qualified. Skilled personnel refers to the following:
•
A member of staff who has received specialist training, which is backed up by
additional knowledge and experience.
•
A member of staff who knows the relevant technical terms and regulations.
•
A member of staff who can appraise the work assigned to them, recognize poten‐
tial hazards, and take suitable safety precautions.
Table 1: Skilled personnel qualifications
Task
Qualification
Mounting
•
Technical training
•
Knowledge of current workplace safety regulations
Electrical installation
•
Electrotechnical training
•
Knowledge of the current electrotechnical workplace safety
regulations
•
Knowledge of the operation and control of the sensor in the
particular application
Commissioning, configura‐
tion, and operation
•
Technical training
•
Knowledge of the operation and control of the sensor in the
particular application
2
SAFETY INFORMATION
6
O P E R A T I N G I N S T R U C T I O N S | TMS/TMM88, TMS/TMM55
8019053/1EF6/2021-12-13 | SICK
Subject to change without notice
