SYSTEM DESCRIPTION
3
15
8021804/2017-11-27|SICK
Subject to change without notice
T R A N S L A T I O N O F T H E O R I G I N A L I N S T R U C T I O N S | Telematic Data Collector
A quick start guide is also included as part of the scope of delivery to provide assistance
at the initial commissioning stage. The quick start guide also includes a download link
for the operating instructions, system documentation, interface specifications, and
TDC
Configurator
configuration software.
Fig. 3: Quick start guide including download link for the documentation and configuration
software
NOTE
Basic inspection for completeness and damage
It is recommended that you carefully check for and report transport damage of any kind
as soon as possible after receiving the system.
Also verify that the delivery includes all components listed on the delivery note.
▸
Report any incomplete or damaged deliveries to Customer Service.
▸
Always document the damage by taking photographs.
Number Part No.
Description
1 TDC gateway system consisting of:
n
6064656
TDC-B100 with GSM antenna and installed overcurrent protection
device
SIM card inserted for operation in EU countries
Quick start guide including a download link for the operating
instructions, system documentation, interface specifications, and
TDC Configurator
configuration software
n
6067023
GPS antenna
n
6067024
3-A back-up overcurrent protection device
n
6067018
1 cable set consisting of:
Cable for the voltage supply and connection of a peripheral device
to two digital inputs (6-pin)
RS485 connecting cable (4-pin)
and/or
n
6064657
TDC-B200 with GSM antenna and installed overcurrent protection
device
SIM card inserted for operation in EU countries
Download link for the operating instructions, system
documentation, interface specifications, and
TDC Configurator
configuration software
n
6067023
GPS antenna
n
6067024
3-A back-up overcurrent protection device
n
6067019
1 cable set consisting of:
Cable for the voltage supply and connection of a peripheral device
to two digital inputs (6-pin)
RS485 connecting cable (4-pin)
INPUT cable (6-pin)