1.3
Target groups of these operating instructions
Some chapters of these operating instructions are intended for certain target groups.
However, the entire operating instructions are relevant for intended use of the product.
Table 3: Target groups and selected chapters of these operating instructions
Target group
Chapters of these operating instructions
Project developers (planners, developers,
designers)
"Project planning", page 17
"Configuration", page 38
"Technical data", page 59
Installers
Electricians
"Electrical installation", page 35
Safety experts (such as CE authorized repre‐
sentatives, compliance officers, people who
test and approve the application)
"Project planning", page 17
"Configuration", page 38
"Commissioning", page 47
"Technical data", page 59
"Checklists", page 65
Operators
"Operation", page 58
"Troubleshooting", page 57
Maintenance personnel
"Maintenance", page 56
"Troubleshooting", page 57
1.4
Symbols and document conventions
The following symbols and conventions are used in this document:
Safety notes and other notes
DANGER
Indicates a situation presenting imminent danger, which will lead to death or serious
injuries if not prevented.
WARNING
Indicates a situation presenting possible danger, which may lead to death or serious
injuries if not prevented.
CAUTION
Indicates a situation presenting possible danger, which may lead to moderate or minor
injuries if not prevented.
NOTICE
Indicates a situation presenting possible danger, which may lead to property damage if
not prevented.
NOTE
Indicates useful tips and recommendations.
Instructions to action
b
The arrow denotes instructions to action.
1.
The sequence of instructions for action is numbered.
2.
Follow the order in which the numbered instructions are given.
✓
The check mark denotes the result of an instruction.
ABOUT THIS DOCUMENT
1
8024758/2020-02-20 | SICK
O P E R A T I N G I N S T R U C T I O N S | sBot Speed CIP – KU
7
Subject to change without notice