SICK RS25 Series, Руководство по эксплуатации

Страница: 30 / 58

Operating instructions Register sensors RS25
Commissioning
30 © SICK AG • Presence Detection • Subject to change without notice • 8015887
8 Commissioning
Pushbutton damage
ATTENTION
Pushbutton damage due to improper handling
Improper handling of the pushbuttons can damage them.
This will make operation difficult or impossible.
For this reason:
• Only handle the pushbuttons with your fingers or a
suitable pointing device.
• Do not handle the pushbuttons with sharp or hard
objects.
8.1 Steps to be performed
Perform the following steps during commissioning:
• Set Node ID.
→
See Page 31, Chapter 8.2.
• Switch the red, green, yellow LED or all LEDs on and off.
→
See Page 31, Fig. 17.
• Check reflection quality/contrast quality.
→
See Page 30, Chapter 8.
• Integrate XDD file of the register sensor RS25 into the configuration
program.
→
See Page 34, Chapter 8.5.
• Configure register sensor RS25.
→
See page Page 34, Chapter 8.6.
→
For the overall menu structure see Page 31, Fig. 17.