SICK miniTwin2 Скачать руководство пользователя | Manualshive

Страница: 6 / 84

background image

Chapter

1

Operating Instructions

miniTwin2

6

© SICK AG • Industrial Safety Systems • Germany • All rights reserved

8013482/YT85/2016-02-23

Subject to change without notice

About this document

1

About this document

Please read this chapter carefully before working with this documentation and the
miniTwin2.

1.1

Function of this document

These operating instructions are designed to address

the technical personnel of the

machine manufacturer

or the

machine operator

in regards to safe mounting, installation,

configuration, electrical installation, commissioning, operation and maintenance of the
miniTwin2 safety light curtain.
These operating instructions do

not

provide instructions for operating machines on which

the safety light curtain is, or will be, integrated. Information on this is to be found in the
appropriate operating instructions for the machine.

1.2

Target group

These operating instructions are addressed to

planning engineers

,

machine designers

and

operators

of plants and systems which are to be protected by one or several miniTwin2

safety light curtains. It also addresses people who integrate the miniTwin2 into a machine,
initialise its use, or who are in charge of servicing and maintaining the device.

1.3

Scope

These operating instructions are original operating instructions.
These operating instructions apply to the miniTwin2 safety light curtain with one of the
following entries on the type label in the field

Operating Instructions

:

8013480/V114
8013480/YY19
8013480/YT85

This document is part of SICK part number 8013480 (operating instructions “miniTwin2”
in all available languages).

1.4

Information depth

These operating instructions contain information on:

mounting
electrical installation
commissioning and configuration
care and maintenance

fault, error diagnosis and
troubleshooting
part numbers
conformity and approval

Planning and using protective devices such as the miniTwin2 also require specific
technical skills which are not detailed in this documentation.
When operating the miniTwin2, the national, local and statutory rules and regulations must
be observed.
General information on accident prevention using opto-electronic protective devices can
be found in the SICK competence brochure “Guidelines Safe Machinery”.

Note

«
...
4
5
6
7
8
...
»

Содержание miniTwin2





















































































Отзывы:

Нет отзывов

Похожие инструкции для miniTwin2

Бренд: Malta Dynamics Страницы: 16

Бренд: Safety Vision Страницы: 24

Бренд: Radiodetection Страницы: 2

Бренд: e-Watch Страницы: 13

Бренд: Smartwares Страницы: 2

NVIP-5DN3615AV/IR-1P/F

Бренд: Novus Страницы: 45

Бренд: Eaton Страницы: 3

Mighty DomeColor Dome Camera Series

Бренд: Vitek Страницы: 28

Бренд: Jesmay Electronics Страницы: 6

Бренд: Lorex Страницы: 2

Бренд: FOAOOD Страницы: 64

Бренд: Smartec Страницы: 29

Бренд: FireWare Страницы: 46

WISENET TNU-6322ER

Бренд: Hanwha Techwin Страницы: 25

Бренд: Bacharach Страницы: 94

Бренд: ZIGBEE Страницы: 73

Бренд: Navaio Страницы: 36

Бренд: DAITEM Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды