SICK miniTwin2, Оригинальное руководство пользователя

Страница: 28 / 84

Chapter 4 Operating Instructions
miniTwin2
28
© SICK AG • Industrial Safety Systems • Germany • All rights reserved 8013482/YT85/2016-02-23
Subject to change without notice
Mounting
4.2.1 Mounting direction of the Twin Sticks
The miniTwin2 safety light curtain comprises two identical Twin Sticks of small size. Each
Twin Stick contains both a sender unit and a receiver unit (Fig. 1). The two Twin Sticks are
mounted such that sender unit and receiver unit are opposite each other. The housing
shape makes mounting intuitive.
After the electrical installation, you can check the quality of the alignment of the safety
light curtain (see section 6.2 on page 53). Please ensure even during mounting that the
Twin Sticks are aligned.
4.2.2 Mounting possibilities
The miniTwin2 can be fastened in the following ways:
Bracket Protective field
height Application characteristics Page
O-Fix V 180 mm Fixed mounting position
Flush
Not suitable for cascading. 29
C-Fix V 180 mm Flexible mounting position 31
L-Fix W 540 mm Fixed mounting position
Not suitable for cascading. 33
Combination
C
A Fix/L-Fix
V 240 mm Fixed mounting position of the
L
A Fix bracket
Flexible mounting position of the
C
A Fix bracket
35
C-Fix-Flex V 180 mm Flexible mounting position
Flexible alignment of the protective
field 37
Refer on the internet to www.sick.com for additional information.
Fig. 16: Mounting direction of
the Twin Sticks
Note
Tab. 4: Mounting possibilities
Twin-Stick
Twin-Stick
R
ec
ei
ve
r
S
en
de
r
R
ec
ei
ve
r
S
en
de
r