Operating Instructions
Chapter
4
miniTwin2
8013482/YT85/2016-02-23
© SICK AG • Industrial Safety Systems • Germany • All rights reserved
29
Subject to change without notice
Mounting
4.2.3
Mounting with O
C
Fix bracket
Using the O
A
Fix bracket you can mount the safety light curtain flat, e.g. directly on the
machine base.
The O
A
Fix bracket is mounted at the top and bottom of the miniTwin2 safety light curtain.
The length of the related Twin Stick is increased by ca. 13 mm by the O
A
Fix bracket (see
dimensional drawing in section 9.3.2 on page 69).
How to mount the miniTwin2 using O
C
Fix brackets:
First mount the two O
A
Fix brackets in the correct positions, however do not tighten the
fixing screws yet.
Insert the Twin Stick between the two O
A
Fix brackets. In applications in which high
vibration may occur, bond the Twin Stick to the mounting surface in the middle of the
device using double-sided adhesive tape from a device length of 600 mm (see
in
Fig. 19 on page 30).
Then fasten the screws of the O
A
Fix bracket to a torque of 5 Nm. Higher torques can
damage the brackets; lower torques provide inadequate protection against
displacement.
Fig. 17: Application example
for mounting with O
@
Fix
bracket
Fig. 18: O
@
Fix bracket
Part No. 2045835
DIN 125 washer
Fixing screw M5
