OPERATION
7
85
8020065-ZLP4/2017-08-10|SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S | Master Data Analyzer
You can also try to restore the broken connection manually (see the next chapter
Restoring a server connection manually
). Once you have restored the connection, you will
have to measure the object again in the operating mode without bar code scanning.
In the operating mode with bar code scanning, measurement data is automatically
transferred as soon as the interrupted connection is restored.
7.4.1.4
Restoring a server connection manually
Manually attempting to restore a connection to the customer server is particularly
important in the operating mode without bar code scanning as the measurement data
must always be transmitted before the next measurement can begin.
1. In the measurement window, click on the gray circle symbol for the connection status.
A window opens containing further information about the status.
2. Click
Reconnect
. The window is closed.
The system attempts to restore the connection. The symbol for the connection status is
yellow while the system attempts to connect to the server.
3. The symbol lights up green as soon as the connection is established.
Measure the object again in the operating mode without bar code scanning.
Note
Note
