MAINTENANCE AND REPAIRS
8
101
8020065-ZLP4/2017-08-10|SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S | Master Data Analyzer
8.1.4
Cleaning the glass panel
As the light beams from the horizontal sender are transmitted through the glass panel to
the sender, we recommend that the glass panel is cleaned on a daily basis.
How to clean the glass panel
▸
Wipe the glass panel with a soft, wet sponge or cloth.
▸
The glass panel should then be dried with a clean cloth.
CAUTION
Damage to the front screen
The optical performance of the horizontal light grid is impaired by scratches and smears
on the glass panel.
Measures
▸
Do not use aggressive cleaning agents.
▸
Do not use abrasive cleaning agents.
▸
Avoid any movements which may scratch or cause any wear on the glass panel.
8.1.5
Cleaning the internal housing area
The internal housing area is largely protected against moisture and dust or dirt particles
due to the brushes located in the long sides of the openings in the housing.
Nevertheless, it is still recommended that the internal housing area is cleaned at regular
intervals in accordance with the maintenance schedule.
WARNING
Risk of injury when lifting heavy objects
Depending on the system variant, the glass panel can weigh up to 15 kg.
Measures
▸
Remove and mount the glass panel with 2 people.
▸
Wear safety shoes in addition to your personal protective equipment.
▸
Lift and carry the glass panel taking ergonomic principles into account.
WARNING
Risk of crushing when mounting the glass panel
There is a risk of crushing when placing the glass panel on the connecting bolts.
Measures
▸
Do not place fingers between the housing and the glass panel.
WARNING
Never use compressed air to clean the device
▸
Never use compressed air to clean the internal housing area.
▸
The internal area can only be vacuumed.
