Chapter
9
Operating Instructions
Laser measurement sensor LD-MRS
104
©
SICK AG · Germany · All rights reserved · Subject to change without notice
8012948/ZMQ0/2017-06-09
Technical specifications
9.3
Conditions for integrating the LD-MRS
Caption:
1 Area to keep clear
Recommendation
The following measures make it easier to integrate the LD-MRS in a vehicle:
–
When integrating the LD-MRS, keep at least the marked areas clear.
–
Additionally only use materials with a low remission as materials bordering to the field
of view.
–
Avoid edges close to the window of the LD-MRS. For optimum design integration the
transition between the surrounding material and the LD-MRS should be smooth.
Together with SICK AG, a customer-specific solution for the housing cover of the LD-MRS
can be developed, so that it adjusts to the conditions on the vehicle and that the vehicle
contour fits smoothly and without edges into the contour of the LD-MRS.
Fig. 9-8:
Boundary conditions for integration
1
1
