manualshive.com logo in svg

SICK i200 Lock, Руководство по эксплуатации

Поделиться
Скачать
SICK i200 Lock Скачать руководство пользователя страница 5

1

About this document

1.1

Scope

These operating instructions are valid for all i200 Lock safety locking devices.

1.2

Additional information

www.sick.com

The following information is available on the Internet:

•

This document in other languages

•

Data sheets and application examples

•

CAD data of drawings and dimensional drawings

•

Certificates (e.g. EU declaration of conformity)

•

Guide for Safe Machinery (Six steps to a safe machine)

1.3

Symbols and document conventions

The following symbols and conventions are used in this document:

Safety notes and other notes

DANGER

Indicates a situation presenting imminent danger, which will lead to death or serious
injuries if not prevented.

WARNING

Indicates a situation presenting possible danger, which may lead to death or serious
injuries if not prevented.

CAUTION

Indicates a situation presenting possible danger, which may lead to moderate or minor
injuries if not prevented.

NOTICE

Indicates a situation presenting possible danger, which may lead to property damage if
not prevented.

NOTE

Indicates useful tips and recommendations.

Instructions to action

b

The arrow denotes instructions to action.

1.

The sequence of instructions for action is numbered.

2.

Follow the order in which the numbered instructions are given.

✓

The check mark denotes the result of an instruction.

LED symbols

These symbols indicate the status of an LED:

o

The LED is off.

Ö

The LED is flashing.

ABOUT THIS DOCUMENT 

1

8020558//2017-02-14 | SICK

O P E R A T I N G   I N S T R U C T I O N S | i200 Lock

5

Subject to change without notice

Содержание i200 Lock





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды