SICK Flexi IO XTDO1 Скачать руководство пользователя страница 6

Страница: 6 / 44

Area of responsibility

Target group

Specific chapters of these operating instruc‐
tions

Manufacturer

Project developers
(planners, developers,
designers)

Installers

Electricians

Electrical installation

Safety experts

Operating entity

Operators

Maintenance staff

Chapters not listed here are intended for all target groups. All target groups must follow all of the safety
and warning instructions in all chapters of the operating instructions!

In other applications, the operating organization is also the manufacturer of the equip‐
ment with the corresponding allocation of the target groups.

1.4

Further information

www.sick.com

The following information is available via the Internet:

•

This document in other languages

•

Data sheets and application examples

•

CAD files and dimensional drawings

•

Certificates (such as the EU declaration of conformity)

•

Guide for Safe Machinery. Six steps to a safe machine

•

Safety Designer (software for configuring safety solutions made by SICK AG)

1.5

Symbols and document conventions

The following symbols and conventions are used in this document:

Safety notes and other notes

DANGER

Indicates a situation presenting imminent danger, which will lead to death or serious
injuries if not prevented.

WARNING

Indicates a situation presenting possible danger, which may lead to death or serious
injuries if not prevented.

CAUTION

Indicates a situation presenting possible danger, which may lead to moderate or minor
injuries if not prevented.

NOTICE

Indicates a situation presenting possible danger, which may lead to property damage if
not prevented.

ABOUT THIS DOCUMENT

O P E R A T I N G I N S T R U C T I O N S | Flexi IO XTDO1

8024583/2020-11-10 | SICK

Subject to change without notice

Содержание Flexi IO XTDO1













































Результаты поиска

Содержание Flexi IO XTDO1

Отзывы:

SICK Flexi IO XTDO1, Руководство по эксплуатации, Страница: 6 / 44

Результаты поиска

Содержание Flexi IO XTDO1

Отзывы: